|Contact Us
  • Park
    PTR Series
    AFM Applications
 

Automated Inline Measurements of Hard Disk Sliders

The key to improving the production yield of hard disk sliders with shrinking dimensions and increasing complexity is accuracy at the nanoscale.
Park NX-PTR provides accurate, automatic measurements for hard disk sliders.

Automatic PTR Measurement and Analysis

Pole Tip Recession measurements are fully automated with the NX-PTR system, giving you higher throughput capability, both at the carrier, rowbar, and slider level. 
Read More related application

nx-ptr full automation

Park Systems’ industrial AFM provides accurate and reliable Pole Tip Recession (PTR) measurements in full automation.

nx-ptr ads

Proper monitoring of the PTR value requires a measurement accuracy of 0.1 nm, referenced against a surface which is 20µm away.


Automatic Wall Angle Measurement & Analysis

Automatically get measurement and analysis of the various wall angle applications.

ibm-wall-angle-measurement-analysis

 


Automatic Defect Measurement and Analysis

edge-apike-defect-measurement -Analysis

Measurement and analysis of various defects such as edge spikes are fully automated.

 

Park NX-PTR features

Low Noise XYZ Position Sensors for more accurate scans

The NX-PTR provides you with unprecedented accuracy in topography height measurement by utilizing its ultra-low noise Z detector instead of the commonly used Z voltage signal that is non-linear in nature. Industry leading low noise Z detector replace the applied Z voltage as the topography signal and make the forward and backward scan gap a negligible 0.15% of the scan range.


Minimal Thermal Drift and Hysteresis reduces tip drift

The body of the NX-PTR is designed to be extremely mechanically and thermally stable, minimizing thermal drift and giving you more precise measurements. A typical thermal drift rate is less than 100 nm/°C for the lateral direction and 200 nm/°C for the vertical direction.


Automatic Measurement Control so you can get accurate scans with less work

aotomatic-softwareThe NX-PTR is equipped with automated software that makes operation nearly effortless. Just select the desired measurement program to get precise multi-site analysis with optimized setting for cantilever tuning, scan rate, gain, and set point parameters. Park's user-friendly software interface gives you the flexibility to create customized operation routines so you can access the full power of the NX-PTR and get the measurements you need. Creating new routines is easy. It takes about 10 minutes to create a new routine from scratch, or less than 5 minutes to modify an existing one.


Park NX-PTR’s automated system features

• Auto, semi-auto, and manual mode so you have complete control
• Editable measurement method for each automated routine
• Live monitoring of the measurement process
• Automatic analysis of acquired measurement data

 

Park PTR - Applications | Park Atomic Force Microscope